This application will verify the CRC of a program
Software ToolsAll Software Tools are available in Adobe PDF format.
Obtain the free Adobe Reader:
This application will verify the CRC of a program on the iVIZION and iPRO using a USB connection
This program is used to adjust the sensors on DBV30x model validators
This app is used to force download the DBV-3XX. When downloading DBV-3XX using PSP03 Program Download and process was interrupted while in download process, firmware in the unit will be corrupted. Must use force download application to re-flash unit.
GEN2 Downloader Application
This application allows the complete communications testing of a JCM Validator using a PC as a host. This version allows selection of the com port. See the Basic Driver Documentation for details.
This application allows the communication testing of JCM Validators and JCM Banknote Recycler units using a PC as a Host. NOTE: This version Basic Driver is not compatible with the UBA, DBV-30x or PUB Validators.
This application allows the complete communications testing of a JCM Validator using a PC as a host. This application is specific to the ID024 protocol. See the Basic Driver Documentation for details on running and using the Basic Driver program
GEN2U, GEN5, KBM60, CouponXpress Downloader Application. *NOTE: v2.3.1 has Microsoft certified drivers for Windows 10 and will only work with Windows 10 OS. Please use the legacy v2.2.13 for older Windows OS.
Legacy OS Version GEN2U, GEN5, KBM60, CouponXpress Downloader Application. *NOTE: v2.3.1 has Microsoft certified drivers for Windows 10 and will only work with Windows 10 OS. Please use the legacy v2.2.13 for older Windows OS.
This application allows functional testing of the GEN2, GEN2U and GEN5 printers as well as viewing sensor and status conditions.
This version of JCM Tool Suite supports Windows 10 installation as well as older supported versions of Windows. This utility combines the capability to Download, Calibrate and view Acceptance information from the front USB port on all models of the UBA, iVIZION, iPRO, TBV, EBA-40, DBV-400 and DBV-500. Performance testing is also available for most units.
Sentry 2 Maintenance Application
Intended to aid barcode ticket designers in making tickets with high acceptance in JCM acceptor equipment. This software tests tickets in 5 important ways: Barcode Value, Length, Amplitude Level, Low Transparency Point, High Transparency Point.
This application will download a data file from a PC to the UBA validator for software upgrade purposes.
This application allows updating the Vega firmware using a USB connection to a PC.
This program allows the user to read the version of software currently loaded in the bill validator. Set the baud rate on the validator with the dip switches and select com port and baud rate in the program.
This application is used for WBA 12/13 sensor adjustment.
This application is used for WBA 20/21/22/23 sensor adjustment.
This application will download a data file from a PC to the WBA/DBV validator for software upgrade purposes – also has version check feature.